When I first started fishing lakes that contained both Kentucky and Largemouth bass, I did not care about identifying which one was on the end of my line. I just enjoyed catching fish. However, once I started fishing tournaments, I had to differentiate between the two species on lakes that have different size limits for each one. For example, Lake of the Ozarks and Bull Shoals Lake each have a 15” limit on black bass but a 12” limit for Kentucky bass.

I will never forget my first tournament on that lake, my partner and I were catching a ton of “bass” on Chompers…and we were having a fantastic time doing it. Neither of us knew, for sure, how to differentiate between the two species. All we had heard was that Kentucky bass have a rough patch on their tongue. We didn’t know HOW rough of a patch…just a rough patch. So…when we started catching fish after fish, if we felt anything AT ALL on the tongue, into the live well it went!

We were a red faced at weigh in and VERY lucky that a conservation agent did not stop us on the water to check our fish. Most of our 12-inch fish were, in fact, largemouth bass! Lucky for us, it was tournament that consisted of a bunch of friends, so we were simply mocked and made fun of instead of receiving monetary penalties.

Differences between a Largemouth Bass and a Spotted Bass

The Tongue

As stated above, spots have a rough patch on their tongue. Largemouth bass do not. Please note that the rough patch is very noticeable on a spotted bass, and you might feel “something” on the tongue of a largemouth.

The Hinge of the Mouth

There is a reason that largemouth bass are called largemouth! If you were to draw a line straight down from the back of a largemouth’s eye to the bottom of the jaw, the end of the hinge of its mouth would be behind that line. Kentucky bass, on the other hand, will have the hinge in front of that line.

The jaw of the Kentucky Bass is in front of the back of the eye.

The hinge of the Largemouth's jaw extends behind the back of the eye.

The Dorsal Fin

Both species have a set of dorsal fins. The front one is larger than the rear fin. The difference is that, on a spotted bass, there is little to no separation between the two. A large mouth will have as distinct ending and beginning between the two.

Little or no separation between dorsal fins.

There is a definite separation between the fins.

Coloration

Both species of bass have a lateral line running down the middle of their body. Spotted bass have blotches or “spots”

above their lateral line. They also have a bluish/green tint to their color. Largemouth bass on the other hand, favor the green side of the color wheel!

The Cheek Scales

Cheek scales on a largemouth bass are the same size as the rest of the scales on its body. Spotted bass have noticeably smaller scales on their cheeks.

Another big difference between the two species is how they fight on the end of the line. Largemouth bass tend to come straight to the top of the water and try to shake the lure out of their mouth. Kentucky bass fight more like a smallmouth. They head to the bottom and resist every inch of the way to the surface.

Hopefully the next time you hook a bass at your favorite lake, you will be better able to identify the football on the end of your line.

I got to the farm late Thursday night. I figured it would be better to get there late and sleep in till 4:45 a.m. than get up at 3 a.m. and head to the farm. As usual, I slept well. Tim and Ben Cole showed up just after 5 a.m. and we headed into the woods. They headed to the back of the farm while I went to the field and sat in the ground blind (that would eventually provide great cover from the rain).

I have been hunting at the Schulte farm since 1993. Spring turkey season always provides great hunts with lots of gobbling by the toms. Unfortunately, this year was different. I did not hear one gobble all weekend. Tim and Ben heard some in the distance, but none was close to the farm.

I did get to see dogs chase four deer about 35 yards from my blind. There is nothing more relaxing than having two dogs start barking and howling at the exact time the turkeys should start flying down from their roost. We have had problems with these dogs in the past and this weekend was no different. They noisily made their way through the neighbor’s farm and eventually to Tim’s farm. I actually spotted the small dog twice. I sure hope those dogs don’t get hit by a passing car or truck.

After the barking and chasing dog episode, I spotted another deer that emerged from the cedar patch across from me. The deer went to the creek for a drink and then headed back into the woods to eventually pop back out into the field exactly in the same spot where the other four deer emerged about a half hour earlier. He/she eventually made his/her way around the edge of the field and out of site.

It wasn’t’ long after the deer left that it started raining. My plan to hunt in the pop-up blind was finally paying off. Tim and Ben headed to the back of the farm…and they “got their panties wet”! While I did not see any turkeys, I did see deer and stayed dry. The guys emerged from the woods about an hour after the rain started, and they picked me up and we headed back to the cabin for a quick high ball and a nap.

Jug Fishing

Turkey season closes every day in Missouri at one o’clock p.m. That leaves the rest of the day to do what ever we want. The activity of choice this year was jug fishing on the Missouri and Gasconade Rivers. I have never jug fished for catfish before, but it has always interested me.

Catfishing usually includes a stout rod and reel with heavy line and heavy sinkers followed by lots of snags and fighting a strong current and really, really stinky bait. Jug fishing is different. The “sport” consists of a jug (two coffee cans soldered together, a half of a “noodle” float, an old duck decoy or even an empty paint can), a heavy line, a weight and a hook.

The line is tied to one side of the jug so the jug stands on end when a fish takes the bait that hangs anywhere from 1 ft. to 4 feet below the jug.

The basic technique for jug fishing is this:

• Put a hot dog on the hook
• Place the jug in the water
• Repeat 15 times with the remaining jugs
• Move the boat above, below or to the side of the jugs
• Watch the jugs and drink beer.

That’s about it.

It is definitely not a physically demanding sport, but it does get interesting when a jug gets hung up in a wing or trail dike that is located just below the surface of the rising river. Releasing the jug takes some pretty savvy boat maneuvering.

We fished for about three hours each day, and we only caught one channel catfish that weighed about three pounds. The great news is that it rained on us both days…and we got our panties wet…again. Here is a great photo (from my Blackberry) of the back of my truck to show how much rain fell from Thursday night through Saturday afternoon. It’s basically a poor man’s rain gauge.

Poor Man's Rain Gauge

We had some great food and even better company. Nick Zagarri, Zach Cole, Ben, Tim and I had a fantastic weekend and are going to miss the cabin until late September when bow hunting season starts.

Nick Zagarri cooking wings and Tim Schulte watching the rain from the front porch of the deer cabin.

I sure hope those dogs don’t get hit by a truck while we are gone.

Lazy Acres is located on the south side of Buck Creek near mid lake. I fished with Tom Visconti and we caught more than 40 bass during the eight-hour event.

Boats Getting Ready for the 6:45 a.m. Take Off from the south point of Buck Creek.

The top-water bite was on as was the lizard bite. We spent most of our time in Big Creek (Big Cedar Creek) and East Sugar Camp.

The fish were sitting on the outside of the buck brush and were holding tight to it. If the fish did not hit within the first 10 feet past the brush, then we picked up and started over.

Top-Water Baits:

• Zara Spook Jr. (Color: white pearl)
• Chug Bug (Color: black back with silver sides)

Lizards

• Zoom 8” (Color: Green Pumpkin) Texas rigged

There were also reports of a lot of fish being caught on Zoom Flukes (White Pearl) on #3 Gamagatsu hooks thrown just in front of the buck brush.

It was an exciting day with one of the best weigh-ins the tournament has ever seen. Everyone caught fish. The team that won the tournament fished in the Big Buck Creek and Trimble Creek areas…as did the second- and third-place teams.

The top three places all had between 14 and 15.75 lbs…which is a decent weigh-in total.

Did anyone else duplicate this pattern? Did you find a different pattern? If so, let me know because I’m heading back down in two weeks.

My wife and I loaded the kids in the truck and spend the weekend in Hermann, Missouri with our friends, Tim and Michelle Schulte. They were celebrating their youngest daughter’s birthday on Saturday and invited family and friends to help celebrate.

Tim and Michelle live on 50 acres just outside of Hermann, and they have a nice lake behind their house that is stocked with bass, bluegill and catfish. Below are some photos of the event. The weather was fantastic as was the company was even better.

Uncle Tim Helping Everyone

Brenna and her Big Fish

Colin Waiting Patiently

Colin Still Determined

Casting Pro

My Wife Enjoying the Day

Two Nice Fish

We had a decent Easter weekend on Bull Shoals and fished on Friday and Saturday. Friday was the better of the two days. We only fished for three hours on Saturday with one fish.

Temperature was in the lower 80s all day Friday with wind at 30 mph. While wind is generally good, I would have liked a little less of it.

Water temps. ranged from upper 40s to mid 60s depending how far we went back in the creeks.

A cold front was scheduled to push through around 4 p.m., and it arrived on schedule. The skies clouded up and the temperature dropped about 10 degrees in one gust. We fished for about 30 minutes past the temp. drop and then headed back to the dock. We caught the biggest fish of the day just as the front was pushing through – a 2.5 lb. Kentucky bass.

Since the wind was so strong, we fished mostly jerkbaits and spinnerbaits. We found a few banks that were protected enough from the wind that allowed us to try jigs, but only one fish was caught bouncing the bottom.

We boated nine fish and with two keepers. We did have one 16” walleye.

Below are photos of some of the lures used and the fish caught. Some of the fish were from a few days prior to me arriving and were caught by my father-in-law.

Easter Weekend on Bull Shoals

4.25 lb. Largemouth

Jerkbaits and Chompers

Jig and Craw

Ike – “How’s it going?”

Other Boat – “Fine.”

Ike – “Are you guys tournament fishing?”

Other Boat – “Nope…Aren’t you Mike Iaconelli?”

Ike – “Yes – I’ve been fishing this bank for four days.”

Other Boat – *silent*

Ike – “Can I go ahead and jump in front of you?”

Other Boat – *silent*

Mike then went ahead and started fishing in front of these guys because he thought that, since he was fishing a tournament, he was somehow more important and more deserving to fish that particular bank at that time.

I have seen this many times, especially on Lake of the Ozarks (LOZ) in Missouri. LOZ is pounded by both recreational and tournament fisherman on a daily basis. I have had MANY boats cut in on me on many occasions, and it infuriates me when it happens.

I wish I could have been the guy in the “other boat” from the conversation above. If so, the conversation would have gone something like this:

Ike – “I’ve been fishing this bank for four days.”

Me – “You must have done pretty good to fish it for four days…what were you catching them on?”

Ike – “I’m fishing a tournament, can I jump in front of you?”

Me – “No…I worked all week and this is the only time I get to fish for the next three weeks. You have fished for four days straight. I was here first and you can jump in behind me if you like, but please don’t crowd me because I’m getting some great fish.”

Ike – *kicks breaks his rear running light and throws it in the water while screaming,* “But I’m Mike Iaconelli…Elite Series Tournament Pro.”

Me – “Never give up, Mike…never give up.”

I feel etiquette should dictate that a boater, if he/she is going to fish a bank that is already occupied by someone else, should jump in BEHIND the existing boat. Most tournament rules require that a distance of 50 yards should separate boaters, but it says nothing about which side of an existing boat is acceptable (to my knowledge).

It seems that tournament fisherman think that, since there is money on the line, they somehow get bank priority over recreational fisherman. Fishermen weigh many factors when developing a “game plan” for a tournament…even for just a day of recreational fishing. Wind, temperature, barometric pressure, channel location, water color, cloudy vs. clear skies, etc. all factor how and where you should fish. In my mind, having other boaters on the water is simply another factor you have to weigh to determine fishing location.

Do I want to fish a bank that has been pounded for three weeks straight? Probably not. I would get out but not an obvious place for fisherman to find. If I get to a bank, and it already has someone on it, my first response is, “I should have hit this bank first and I could have had it to myself.” If I absolutely HAD to fish that bank, I would hop over to a nearby bank and wait until that fisherman was done and THEN go to the bank.

Maybe I am wrong and am reading too much into this. How many of you have been fishing on a bank and had a boat jump in front of you? I would love to know your thoughts on this.

“You know,  fun is in all the things you love doing , but fishing and  hunting  are different.  Hunting is about game on get up and going!  Fishing is about getting out on the water and having fun. My dad is a hunter  and a fisherman. My name is Brenna , and I love fishing and hunting!       

On to fishing.   When I was littler me and my family bought some  minnows to fish with. I really didn’t want to fish at that time.  So instead I got the minnow bucket ,  stuck my hand inside, and pulled out a handful of minnows. After that I fished for a while and used the rest of the time playing with Minnows.  Speaking of, I was down in Florida on Destin beach. Then I went down to the water looking for shells and crabs. I ended up sticking my net in the water and coming up with a net full of minnows. So I spent the rest of the day minnow fishing.   That’s my story and tell all your comrades who like fishing or hunting to check out FOR THE FISHERMAN  at  WordPress.com.   Bye!”

From the Mind of a Child

  Written by the daughter of a very proud father…

There is a simple way to tune your jerkbait (or any crankbait) so you don’t lose any time chasing big bass in the Spring.

Tips to Correctly Tune Your Jerkbait or Crankbait

• Take a pair of needle-nose pliers and place it horizontally in line with the bait while you pinch the eyelet on the nose of the bait.
• Roll your wrist in the OPPOSITE direction of the way the bait is swimming.
• The adjustment should be done in very small increments
• Throw the bait out a few yards and retrieve. If the bait still swims incorrectly, repeat the process until the bait swims straight. If the bait over corrects, then roll your wrist in the opposite direction until the bait swims correctly.
• Click HERE to watch a video on tuning your baits.

If want to invest a few dollars, there are tools on the market designed specifically for tuning baits. These are basically small metal rods with a slit in the end…just big enough to insert the eyelet of the bait. Simply follow the steps above using the tuning tool instead of needle-nose pliers. They can be purchased on-line or at your local fishing tackle store.

Getting your boat back on the trailer is an easy process. Simply repeat in reverse the process of putting it INTO the water.

When you approach the courtesy dock (or bank), park your boat on the opposite side of the ramp as to not block anyone else from backing into the water while you are walking to your truck. If there is not courtesy dock and you have to park on the bank, park well away from the ramp. Turn your engine off and remove your boat keys. This step will help prevent anyone from taking your boat.

Typically, a boat ramp is not as busy as the day progresses. Everyone tends to show up all at once at first light, but the “end of the day” varies for each fisherman. Consequently, you may have less traffic to deal with when pulling your boat.

Back your trailer down the ramp to where the water is at the top of your wheels. How far you back your trailer into the water will vary from boat to boat. When you find your trailer’s “sweet spot”, make a mental note of how far your wheels stick out of (or how far they are in) the water.

If you back the trailer in too far, you boat will not hit the running boards and your hull will slam into the trailer. Your boat should contact the running boards enough for you to have to either give it a little gas or simply crank it on. Turn your engine off and trim your motor up so you don’t make contact with the ground.

If you are fishing with a partner, they can attach the boat to the trailer. If you are fishing alone, you do that yourself.

Once the boat is secured to the trailer, single boaters can climb off the front of the boat on to the trailer. Having your deck clear of rods and lures will help this process.

Depending on the slope of the trailer, you might have to get your feet wet if the bumper of your truck is past the water line. If you don’t have a shell on your truck, you can climb into your truck’s bed and jump off the side onto dry land. If you drive an SUV, you can open the back hatch and crawl through the vehicle.

During cold weather, I like to carry a pair of rubber boots that can easily be slipped on so my feet don’t get wet when I go from the trailer to the truck.

You can now pull your boat out of the water and finish strapping the boat to the trailer putting on the transom saver. Make sure you pull far enough away from the boat ramp so others can easily access the ramp. Blocking the ramp to clean up your boat or put your rods away or to put on your transom saver is a big NO NO.

Drain all live wells completely. Some states are having trouble with zebra mussels, which can be transported from one body or water to another by water left in the live wells. If you have been in water that you KNOW has zebra mussels and you are heading to a new lake, wipe down your hull and check your motor and trailer for any unwanted zebra mussel hitchhikers too. Manual car washes are a quick way to remove them.

Pulling your boat is a process that gets easier the more you do it.

Bass fishing lures millions of anglers each year. Warm weather signals fishermen to grab their gear, hook up their boats and head to their favorite lake. Anyone who has been to a boat ramp at first light on a warm spring Saturday realizes that bass fishing is a VERY popular sport.

We’ve all been in line at the boat ramp only to find that one inexperienced boater can bring the boat launch process to a grinding halt. There are things that you can do to expedite the process…experienced or not.

Before You Head To The Lake

If you have not been on the water since last summer or fall, invest in a pair of “ear muffs” for your motor, and test your it before you leave your house. Make sure that your motor is working properly and starts quickly. When you get to the boat ramp, you can quickly launch your boat and get out of the way for the next person to launch.  Don’t wait until you are backed into the water only to find out that your motor won’t start.

If you have started your boat at home but find that it won’t start when you get to the lake, quickly check the following:

• Kill switch; did it get pulled accidentally?
• Battery connections; these sometimes loosen due to vibration from traveling.
• Make sure the ball on your fuel line is hard and primed. If your motor is not getting fuel, it won’t start!

Before You Get In Line

If you are launching your boat at a State Park or private marina, you most likely will have to pay a fee. Fill out the information on the envelope and pay your fee prior to getting in line at the ramp.

Also, unhook your straps and remove your transom saver prior to getting to the water. Only leave your front strap hooked until you boat is in the water.

Backing Your Boat Down the Ramp

Inexperience boaters are often uneasy about backing their boat down straight down the ramp. Follow these techniques

• Start by making sure your trailer is straight behind your truck. Keep your wheel in line with the side of your truck.
• Place one hand on the bottom of the steering wheel to determine which way you want the trailer to move. If your boat needs to go to the left, move your bottom hand to the left.
• Practice in a parking lot away from the lake until you are comfortable backing the trailer in a straight line.

Multi-Slot Boat Ramps

If the boat ramp you are using can accommodate more than one boat at a time, make sure you don’t take up more than one space. This seems like a pretty obvious thing to do, but it happens all the time.

No Partner?

• If you are fishing without a partner, make sure your front deck is clean and easily accessible. This will make climbing into your boat when it’s backed down the ramp quick and easy.
• Start your boat and quickly tie it off on the opposite side of the courtesy dock (if there is one) or pull your boat up onto the bank away from the ramp so you don’t block any other boaters once you move your tuck.

Courtesy Dock

The courtesy dock is for unloading your boat. If you have to get rods ready, change lures, re-spool your reel, motor out to the middle of the cove or the lake. Hanging around the courtesy dock will prevent others who ARE launching their boat from using it.

Don’t be the guy at the ramp that everyone hates to have in front of them. Putting your boat in the water should be quick and easy. Do you have any other tips for getting your boat in the water quickly and easily? Let me  know by leaving a comment!